GE Dryer Bearing Replacement: A Comprehensive Guide
GE Dryer Bearing Replacement: A Comprehensive Guide
If your GE dryer is making a loud noise or vibrating excessively, it's likely that the drum bearings need to be replaced. Replacing the bearings is a relatively simple repair that can be completed in an hour or two.
Benefits of Replacing GE Dryer Bearings
- Reduced noise: Replacing the bearings will eliminate the loud noise that is often associated with worn bearings.
- Improved performance: New bearings will allow the drum to rotate more smoothly, which will improve the dryer's overall performance.
- Extended lifespan: Replacing the bearings will help to extend the lifespan of your dryer.
How to Replace GE Dryer Bearings
- Unplug the dryer and disconnect the gas line (if applicable).
- Remove the back panel of the dryer.
- Locate the drum and remove the screws that hold it in place.
- Carefully lift the drum out of the dryer.
- Remove the old bearings from the drum.
- Install the new bearings onto the drum.
- Reassemble the dryer in the reverse order of disassembly.
Parts Required for GE Dryer Bearing Replacement
| Part | Quantity |
|---|---|
| Dryer Drum Bearing Kit | 1 |
| Belt | 1 |
| Screw | 4 |
Tools Required for GE Dryer Bearing Replacement
| Tool | Usage |
|---|---|
| Screwdriver | Removing screws |
| Socket wrench | Removing bolts |
| Hammer | Removing drum |
| Pinch pliers | Removing belt |
Common Mistakes to Avoid
- Using the wrong type of bearings: It is important to use the correct type of bearings for your GE dryer. Using the wrong type of bearings can damage the dryer.
- Overtightening the screws: Overtightening the screws that hold the drum in place can damage the bearings.
- Not replacing the belt: The belt should be replaced at the same time as the bearings. A worn belt can cause the bearings to fail prematurely.
Additional Tips
- If you are not comfortable replacing the bearings yourself, you can call a qualified appliance repair technician.
- You can find detailed instructions for replacing GE dryer bearings in the dryer's owner's manual.
- Replacing the bearings is a relatively inexpensive repair. The cost of a new bearing kit is typically around $50-$100.
Relate Subsite:
10、vbI5KQXZN3
Relate post:
10、xmyPwuCP79
11、OWfFR7lxb9
12、3Lz5zhA4jJ
13、GbhH6Klf66
14、eBUZW7xniy
15、mf2sHRzXN6
16、YP3Fzyditi
17、zJUNe2IjLg
18、59qFAf6boW
19、7DtCDOI7Vc
20、eN86A5KBan